DIY flower pot: unexpected solutions to create a masterpiece

Fresh flowers are a real decoration of any room and site. They are able not only to revive the atmosphere, but also to give it naturalness, airiness and naturalness. For growing plants, various flowerpots of different shapes and sizes are used. The containers can be purchased at the store. However, the best solution is to make a flower pot yourself. All kinds of ideas for creating an original and unique flowerpot are outlined in the article.

A flower pot can be made by hand, while embodying the most extraordinary ideas

How to make a clay flower pot with your own hands

The most popular material for making a flower pot is clay, which can be used to make products of different sizes and shapes. To do this, you need a self-hardening material, a plastic container, acrylic paint and moisture-proof varnish.

Clay is the most popular material for making flower pots.

The clay is thoroughly mixed until a homogeneous and pliable mass is obtained. The mixture is rolled into a layer, the thickness of which should correspond to the thickness of the walls of the future flowerpot. The bottom is made according to the shape of the plastic container. From the remaining mass, it is necessary to cut a strip, the size of which corresponds to the height of the pot. The length of the product must exceed the circumference of the base.

The bottom and the strip are interconnected to form a flowerpot. All joints are smoothed out to achieve an even, smooth surface. The process is carried out by wetting the fingers with water. The finished clay flower pot should naturally dry for 48 hours. In conclusion, the flowerpot is painted in several layers with a finishing varnish.

Clay pots can be decorated as you wish

The ideal solution for making a small succulent pot is polymer clay. To do this, you need the material itself, a knife, a teaspoon and an oven. The first step is to prepare the clay by kneading it to a soft state so that it becomes pliable for sculpting.Form a ball from the material, the size of which will correspond to the dimensions of the future pot. The workpiece should be placed in the freezer for 10 minutes in order for the material to harden, which will facilitate further work with it.

Pot formation begins by creating a depression for the substrate. To do this, using a spoon, select the clay from the center of the ball, after which the workpiece is again sent to the freezer for another 10 minutes. Further, the pot can be given any configuration, leaving the walls rounded, or leveled with a knife, forming a cubic product.

The finished pot is baked in the oven. The firing temperature and time are indicated on the clay packaging. The finished product can be left in its original form or decorated using one of the techniques.

A clay flower pot is not difficult to make even without a potter's wheel

DIY flower pots from plastic bottles

Using plastic bottles, you can build an orchid pot. For this, the container is cut in half. Having stepped back from the bottom by 15-20 cm, cuts are made in the amount of 8 pieces to get the petals. They should be bent inside the dish. The second half is filled with the substrate with the plant and inserted into the prepared base pot. Thanks to the curved petals, the flowerpot will hold.

You can create a flower pot in the form of animals from a plastic bottle. To do this, the face of the animal is cut out in the front of the element, and the tail in the back. It is important to use sharp scissors to shape the workpiece. Drainage holes are made in the bottom of the tank. The outer surface of the resulting flowerpot is painted with acrylic paints. Using a permanent marker, the animal's face is drawn: eyes, mouth and nose. The finished flower pot from a plastic bottle should be coated with non-toxic craft varnish.

A beautiful flower pot can be made from a regular plastic bottle

Using a plastic bottle and disc, you can create an elegant tabletop pot with a leg. The container is cut into two pieces along a wavy line. A necked element with a tightly screwed cap is glued to the middle of the disc. After setting, the workpiece is painted with spray paint.

The plastic bottle can be cut lengthwise, leaving the neck and bottom intact. It is recommended to make holes on the sides with an awl so that the structure can be suspended.

Bottle pots in the form of animals look unusual and original

Original table pots for flowers from tin cans

You can create an original mosaic flowerpot from an ordinary tin can. For this, the container is coated with a plaster solution, on top of which a mounting mesh is laid. Next, the mosaic is performed directly. To do this, you can use pebbles, pieces of tile, glass or shells. After the pot has dried, all voids should be masked with grout.

Do-it-yourself low flower pots can be created from cans and wooden clothespins, which are attached around the circumference of the container. The decor can be left intact or painted in different colors. In a similar way, you can arrange a tin can with colored pencils, tying it with twine or ribbon.

The tin can can be slightly wrinkled, so the pot will look non-trivial

The tin can can be simply coated with different acrylic paints. In this case, the container can be in its original form or you can artistically wrinkle the jar. Another original solution will be tying the container with twine or colored thick threads around the circumference of the product.

A pot of flowers, woven from twigs, looks unusual and original. To make it, you will need thin, even twigs, a skein of twine, a piece of burlap, a cylindrical tin can and glue.The rods are intertwined and tied with twine according to the principle of a mat. The can is greased with glue, on which the burlap is fixed. After complete drying, the product is wrapped in a mat, which is attached with twine.

Tin can pots painted in different colors will add colors and mood to the interior

How to create a flowerpot from a pallet, barrel, bars or a wooden box with your own hands for flowers

Wood or lumber is the perfect solution for creating an outdoor flowerpot. For this purpose, you can use a barrel made of wood, leaving it in the form of a solid structure or sawing it in half across or along. The first option allows you to get two long flower pots at once. And in the second case, the bottom should be made for the upper structure.

You can build a wooden flower pot from old pallets. To do this, it is necessary to disassemble the structures into elements. The first step is the foundation. Then the side elements of the pot are assembled, which are fixed to each other with self-tapping screws.

An ordinary wooden box can be easily turned into a beautiful flower pot

To do this, long boards are cut in half, and short boards are cut into three equal parts with the formation of beveled cuts. Beveled boards are connected to each other using self-tapping screws, forming a hexagon. Boards are nailed to each element, which will be the legs of the flowerpot.

The next row of wooden elements is stuffed to the resulting frame. The finished product can be left in its original form, covered with varnish, or painted.

Important! The finished structure must be treated with a special moisture-repellent and antimicrobial impregnation.

Bars or boards are suitable for making a flower pot.

An old wooden box can be used as an outdoor flowerpot. It should be painted or varnished. A DIY flower box can be created from wooden slats and a sheet of plywood acting as a base. The slats are attached to each other with self-tapping screws, forming the walls of the flowerpot. They are placed vertically or horizontally.

Related article:

DIY flowerpots: original decoration of the flower zone

Products made of fabric, paper, wood, cement, twigs, ropes, waste materials and other elements. Various options for decorating the product.

A tall flowerpot can be made from block house boards. For this, the products are sawn, according to the height of the future flowerpot, into equal lengths. The elements are connected to each other using grooves. On the inside, the boards are fixed with a bar and self-tapping screws.

Helpful advice! All butt joints should be treated with liquid waterproofing, which will ensure the tightness of the product.

Junk things for creating original flower pots with your own hands

You can use the most unexpected things to create flower pots. The ideal option would be the elements of earthenware, earthenware or porcelain dishes in the form of cups, teapots, deep salad bowls and other containers. Such flowerpots will ideally fit into the Provence or country style. At the summer cottage, you can use enameled dishes for planting flowers. Teapots, pots, buckets and cans are suitable for this. Drainage holes are made with a drill.

Helpful advice! A bonsai pot can be made from a wide, shallow salad bowl.

Flowerpots from old shoes look original. For this, boots, shoes, galoshes, boots are suitable. For drainage, holes are made in the sole of the products. Shoes can be painted with spray paint to make the flowerpots look original. When using bright rubber boots, they can be left in their original form.

In an old unnecessary cage, you can create a gorgeous floral arrangement

You can create an unusual flowerpot using old tulle, a tablecloth or a piece of fabric. This will also require cement mortar.The material is dropped into a container with the composition and remains in it until it is completely saturated. The flap is removed and laid out on a pre-prepared container wrapped in foil.

The fabric is formed into a product of the desired appearance with wavy edges. In this form, the container should be until completely dry. A ready-made, do-it-yourself flowerpot made of cement and fabric can be painted using a spray can.

It is easy to create a flowerpot of an unusual shape from a vinyl record, which must be preheated and then given the required configuration. The finished product can be left black or painted in bright colors. A small square flower pot is made from old floppy disks, joining their edges with glue.

A street flower bed, created from an old suitcase or chest, which can be painted in bright colors, looks nontrivial. A flowerpot from an old umbrella looks very impressive. When unfolded, its inner space is filled with earth, where plants are planted.

A flower pot is also made from an old canister. For this, one of its lateral parts is cut off. The bottom of the container can be fixed to the wall to create a face-shaped pot. The surface is coated with glue and sprinkled with sand, recreating the appearance of a sand man.

Original ideas for making large flower pots

For making large pots, one option is to use grout. Such a product will be durable and can be installed outdoors. A cement flower pot with your own hands can be created in any size. Depending on this, you should choose a suitable form or make the formwork. You can use any bucket, plastic bottle, or tin can.

A large log pot will perfectly fit into the interior with eco design

The mold is pre-lubricated with oil. A cement mortar of sour cream consistency is prepared and poured into a container. To make a hole in the future pot, you should take a bottle or other rectangular element, previously oiled, and immerse it in the solution in the central part of the container, without reaching the bottom. After the pot is set, the molding elements are removed. The outer surface of the flowerpot is sanded and decorated with oil paints.

Helpful advice! The decor of the pot looks impressive, where the paint is applied in sections and rubbed with a sponge.

Similarly to the above technology, the process of making a flowerpot from gypsum is carried out, which is diluted with water in a 2: 1 ratio. The solution is thoroughly mixed. Two containers of different sizes are required. A large container is covered with cling film, and a smaller one is wrapped outside.

A 2 cm thick solution is poured onto the bottom of the larger vessel, which should grasp slightly. A container with a smaller diameter is installed on top. Gypsum mixture is poured into the formed gaps. After 2 hours, the pot can be freed from plastic molds and decorated.

With the help of hollow cinder blocks, they often create a flower arrangement for the garden, building elements in the form of a pyramid or tower, as shown in the photo of the pots. You can add originality to the flowerpots by coating the surface of products with paints. A plant pot can be created from a regular trash can, which is made of shiny material. Rotating furniture wheels are attached to the bottom of the product for the possibility of its movement.

A newfangled trend in garden design is the creation of gabions. These are structures, the frame of which is made of stainless mesh, and the cavity is filled with pebbles or stones.

Mosaic decor looks beautiful on large pots

Interesting options for floor pots and flower vases with your own hands

An interesting and extraordinary solution will be a floor flower pot made of wood. For work, you need a stump, log or thick twig.The wood blank should be freed from the core. It can be removed both in the transverse and longitudinal position of the workpiece. The result is a tall or long pot. The resulting hole is carefully cleaned and polished. The decorative design of a flower pot made with your own hands from a tree can be a removed bark. It is recommended to emphasize the natural beauty with a layer of varnish.

Helpful advice! A garden pot made of 5 ceramic tiles glued together will look original and stylish.

A stump or log can be cut into several pieces. Remove the core from each element. The components are arranged in several rows, creating a multi-tiered composition. For structural reliability, all elements are glued together.

An interesting solution would be a floor pot made from an old plastic container, sheathed with wooden slats. The container should be pre-treated with an antiseptic. A number of drainage holes are made in the bottom. Over the entire surface, the container is sheathed with pre-painted wooden planks, which are located in an upright position.

Outdoor outdoor flowerpots can be made from old car tires by painting them in different colors and decorating with any pattern. The products are left in their original design or one of the side surfaces of the tire is cut out in a figured manner. The finished outdoor flower vase is primed and painted with a pattern.

Helpful advice! In order for the tire to cut well, it should be treated with machine oil or grease for better gliding of the knife blade.

A spectacular floor pot can be made from cement mortar

Such a flowerpot from a tire can be decoratively decorated using mosaic technique. For this, a mesh is applied to the surface of the product, on top of which a thick cement mortar is applied. The mosaic elements are pressed into the mix. For this purpose, you can use tiles or pebbles.

A flower garden made of glass bottles, which are stacked around the circumference of the base in several rows, will look unusual. You can use a tire or a bucket as an inner base. The walls of the container are coated with a thick cement mortar. The necks of the bottles are pressed into the mixture.

Interesting options for creating hanging flower pots

For plants that do not need frequent watering and ampel varieties, a hanging coconut shell pot is a good option. To make it, the nut must be cut in half, removing the pulp from it. This creates two pots. Several holes should be made in the lower part of each half using a drainage drill. To suspend the structure, nests are also made on both sides of the shell.

Helpful advice! Such flowerpots do not need additional decoration, since they have a pristine exotic look.

A hanging flowerpot for giving with your own hands can be woven from thin branches of a vine or artificial rattan threads. The product can be round, conical or cylindrical. The material is pre-soaked to gain flexibility. The first step is to prepare the bottom of plywood, along the circumference of which holes are made. Thick twigs are vertically inserted into them to create a frame.

The vine is laid between the rods of the frame and pressed with an awl, forming the walls of the pot of the required height. The finished product is treated with moisture-proof impregnation and varnished.

For flowers that do not like frequent watering, hanging products are suitable.

Unexpected decisions regarding the creation of hanging flowerpots for the garden with your own hands

A do-it-yourself hanging flower pot can be made from an unnecessary plastic bottle from shampoo or shower gel by cutting it lengthwise or across. Holes are made with an awl.Blanks can be painted with acrylics, decoupage or tied with thick colored threads.

This unique hanging composition is obtained from a bird cage that is used as a planter. This option is suitable for short plants. The cage can be spray painted and any decor can be done.

An original solution for creating a flower pot on the street with your own hands will be the use of metal baskets, which are covered with a substrate. A layer of coconut fiber is laid at the bottom, which does not allow moisture to pass through and at the same time gives the product an attractive appearance.

A hanging structure for flowers from a plastic bowl, which is inserted into a vertical hoop, will look stylish and unusual. The pot should be fixed with Moment glue. A hanging pot can be created from an old soccer or basketball by cutting it in half or making another unusual shape. Holes for suspension are made on the sides at four points, into which the rope must be inserted.

A few simple solutions for decorating flower pots

To get a beautifully decorated flowerpot, you don't have to create a product from scratch. You can transform an old pot with your own hands using one of the techniques.

Those who know how to draw beautifully can make a unique designer item by painting a flower vase with acrylic paints with their own hands. The work can be done together with children, resulting in unique and original products.

For a flower pot, you can knit a beautiful cover made of threads

Using nail polish, they create an interesting design of flowerpots. To do this, pour several bottles of different colors into a bucket of water and dip the pot in the resulting composition for a few minutes.

With the help of shells and pebbles, you can bring marine motifs to life. For this, the surface of the pot and the decoration elements must be degreased. The shells are fixed to the flowerpot with quick-drying glue. The resulting voids are filled with sand, which is applied to PVA.

DIY flowerpot decor can be done using mosaic technique. To do this, use buttons, stones, coins, broken glass, ceramic tiles. The decor from wood rings of different diameters will look original. The elements are recommended to be glued or fixed by means of plaster, which is used to coat the pot.

You can also fill in the gaps with cement mortar, to which paints should be added to obtain a more attractive appearance of the finished product. The composition is applied with a brush. Any excess solution that gets on the shells should be removed immediately with a soft cloth. The final stage is the coating of the entire product with varnish.

As a decoration, you can use eggshells, which are previously disinfected and dried. It can be white, brown or dyed in a different color. The shell is glued to the flowerpot with the convex side. Varnish is applied to the finished product.

Important! It is convenient to correct the position of the shell elements with a toothpick or needle, so as not to violate the integrity of the products.

The flower pot can be painted or painted with bright colors

How and how to decorate a flower pot with your own hands

A common technique for creating a flower pot decor is decoupage. To do this, you will need special napkins with a beautiful ornament, glue, white acrylic paint and varnish, a flat brush and a pot. White paint is applied to the surface of the flowerpot in several layers. Remove the top layer from the decoupage napkin. The drawing is transferred to the surface of the flowerpot, fixed in it with an adhesive composition. The canvas is leveled with a brush. After complete drying, the surface is varnished.

How to decorate a flower pot with textiles? To do this, you can use lace, scraps of fabric, threads, laces, ribbons. The elements are fixed with PVA glue, creating original compositions. Fragments of burlap are glued in the same way. The combination of two textile options looks original. The composition can be complemented with beads, beads and braid. Using the crochet or knitting technique, you can create cute cases for flowerpots, which will bring coziness and comfort to the atmosphere.

The decor of the pot, made with cereals in the form of buckwheat, rice, pearl barley or millet, will look unexpected and original. The base is created from toilet paper, which is torn into pieces and glued to the surface of the pot. Using a wooden stick, folds should be formed, which are sprinkled with cereals.

Acrylic paints are applied to a completely dried surface. To create a decor, you can also use multi-colored beans, peas and pasta, laying out unusual compositions from them, fixing them to the surface with glue.

There are many options for making pots and flower stands with your own hands from scrap materials. Each of them assumes a creative approach when creating a product. It is not at all necessary to use expensive materials. An unexpected real masterpiece can come from old unnecessary things that were preparing to go to the landfill.