The range of IR heaters is wide and varied. They can be used both indoors and outdoors. The article will highlight in detail the issue of choosing infrared heaters, as well as their scope, characteristics and other nuances. Before purchasing equipment, you should analyze infrared heaters: pros and cons, prices for models. Studying the basic parameters will help you choose the optimal model.
The use of infrared heaters is profitable and efficient
Content
Use of infrared heaters for space heating
Infrared space heaters are relatively new equipment used as primary and secondary heating. A set of advantages contributes to their popularity, the main among which are economy and ease of use. Installation and operation of these devices does not require the involvement of qualified personnel. They also do not need periodic repairs and have a long service life.
IR home heaters are durable and versatile
Infrared heat transfer is based on the heating of nearby surfaces and objects. Thanks to this, all the energy spent on heating is converted into heat without loss, which cannot be said about devices that heat the air around the air. Using such heaters, you do not have to worry that this will lead to uneven distribution of warm air in the room and changes in humidity levels.
The ability of such devices to carry out spot heating is widely used in industrial enterprises with impressive floor space. Using infrared heaters for heating the workshop, it is possible to achieve an increase in energy savings of 45%. So, you can use local heating of workplaces located at a considerable distance from each other, without resorting to heating the entire room.
Using IR heaters at home, you can create zones with different temperature regimes in the house. Many types heaters have an interesting design and can be used as a decoration.Equipped with remote controls make their regulation as comfortable as possible. The function of the floor-standing infrared electric heater Polaris PKSH 0408RC includes the rotation of the device, which is very convenient. The heater is designed to heat a room of 20 m², does not burn oxygen, and has a built-in timer.
Some heaters have a modern design and fit perfectly into the environment
Helpful advice! Models of film wall IR heaters can be used as a decorative panel that complements the interior.
Recently, many car enthusiasts have used infrared heaters to heat their garage. Having installed the device above the hood, it will be easy to start the car even in severe frosts. For installation in the garage are popular wall models of infrared heaters Peony. You will be warm during the self-service car maintenance in the autumn-winter period.
Infrared heaters for industrial premises and agricultural facilities
Taking into account the rapid rise in energy prices and the limitation of their use, the use of infrared heat sources for industrial and agricultural complexes is becoming almost the only alternative to heating, especially when it comes to high and large workshops, boxes, greenhouses, garages and pavilions. The operation of heaters is not accompanied by noise or vibration and does not negatively affect the condition of people at the workplace.
Infrared heaters are very popular for heating industrial premises.
The use of infrared heaters for industrial premises
It should be noted that infrared heaters have a high heating rate, unlike traditional heating equipment. Heating occurs immediately after the heaters are connected to the electrical network. This feature allows you to turn off or reduce the intensity of the operation of devices at night or lunchtime in production, which also contributes to their energy efficiency.
Functioning locally, the heaters create the impression that the room temperature is several degrees higher than in reality. Given this fact, you can set the temperature lower, but at which the person will feel comfortable. This will contribute to even greater energy savings, since a 1 ° decrease in temperature reduces energy consumption by 5-6%.
Using infrared heaters for heating industrial premises, the management of enterprises reduces the cost of installing boiler rooms, additional ventilation systems. Indeed, there are no moving elements in the device of heaters, they do not contribute to the accumulation and circulation of dust or other air pollution. Wall and ceiling mounting methods can significantly save useful floor space.
The more powerful the heater, the larger the area it can warm up in less time and without losses
IkoLine heaters from TST Company have proven themselves well. Model IKO 20M is one of the most powerful heaters that can be installed on a ceiling with a height of more than 3.5 m, the heating area as the main source is 30 m². Heater IKO 30 is ideal for use in high rooms with minimum power, the model is optimal in terms of price and quality ratio.
Due to their high power and efficiency, the use of infrared gas heaters for industrial premises is very popular. Such equipment is equipped with gas pressure monitoring devices; some models do not need to be connected to the mains to start. Patriot Power's GT 7IN heater is quiet, easy to operate and can be used as the main heat source in large buildings where there is no central heating.
For open public places (playgrounds, cafes, terraces), heating the space with street electric infrared heaters is suitable. These appliances are practical, economical and capable of heating an area within a radius of 3-4 m. The 1.5 kW Heliosa 999 outdoor heater can heat up to 15 m² of open space. The device is designed for wall mounting and has a shoulder-holder turn of 0.5 m.
Outdoor electric heaters are used on outdoor terraces, playgrounds and cafes
Heating greenhouses with infrared heaters
The main advantage of infrared heaters for greenhouses and other agricultural objects is that the heat is directed from the bottom up, heating the soil and plants directly. An analysis of the use of such equipment in greenhouses has shown a 35% increase in sprout germination due to the effect of heat on the soil. Many people use a film-type infrared heater laid under the ground to heat a polycarbonate greenhouse.
The use of infrared heaters for heating greenhouses is characterized by a number of advantages:
- reduction of heating costs due to low energy consumption;
- radiation safety for plants and greenhouse staff;
- there is no need for special humidification of the greenhouse, since the humidity level does not change during the operation of infrared heaters;
- noiseless work, which is important for people working in greenhouses;
- high heating rate;
- the ability to create in one complex zones with different temperature regimes, as required by different types of crops;
- availability and ease of installation allows you to install heaters without the involvement of qualified specialists, saving on services for the installation and arrangement of expensive heating systems;
- high fire safety;
- saving usable space thanks to wall and ceiling mounting.
Infrared lamps for heating greenhouses in winter
Helpful advice! When choosing which heaters are better than convectors or infrared, it is worth considering that the latter consume less electricity by 45-65%.
Using infrared heaters for heating polycarbonate greenhouses, it is possible to create inside conditions that are most suitable for natural ones, since such heating is akin to solar radiation. In winter, it is recommended to direct radiation to the walls of the greenhouses, which will contribute to an acceptable temperature for plants in this particular zone.
Infrared heaters for chicken coops: which model to choose
There are several ways to heat a chicken coop: gas, stove and electric. The purchase of a gas boiler will justify itself only for large farm poultry houses. Furnace heating requires fuel (wood, coal) and constant monitoring. Heating with electric heaters is an acceptable option, but remember that this is a rather expensive type of heating equipment.
When choosing which heaters are better convector or infrared for the poultry house, it is necessary to take into account the energy efficiency of the devices. Infrared heat sources convert electricity into heat with almost no loss. In addition, heat from infrared radiation will accumulate directly in the area where birds are located, and not rise to the ceiling, as when using a convector.
Chicken coop infrared lamp maintains optimal temperature in winter
The safety of using infrared heaters in the poultry house also plays an important role: due to the fact that the devices are fixed to the ceiling, the risk of equipment contact with birds is excluded. For small private chicken coops, the Russian-made BiLux B800 heater of the AIR series is quite suitable. A 0.7 kW appliance is sufficient for heating 8-14 m² with an energy consumption of 0.2 kW.
When installing an infrared heater in a chicken coop, it is necessary to equip it thermostat... Thanks to this device, it will be possible to set the heating temperature required for keeping birds in winter. Having set the temperature level once, you don't have to worry about the microclimate: as soon as the temperature drops below the set level, the heater will turn on in automatic mode.
Which is better: convectors or infrared heaters
Comparing infrared and convector heaters, the main advantages and disadvantages of each type should be noted. The advantage of convectors is the heating of the entire room, but this principle can also be attributed to the disadvantage of such a heater. After all, there is always a risk of loss of warm flows through loosely closed doors and windows and, as a result, the room will remain insufficiently heated.
The principle of operation of infrared heaters and convectors in comparison
In this sense, convector heaters are suitable for heating a small, maximum sealed room. After turning on the device, the room warms up quickly, and due to the low temperature of the surface of the device, oxygen from the air is not burned. In addition, accidental contact with the device is safe for humans, which allows it to be used in children's rooms.
Unlike convection heaters, infrared heating acts locally, consuming energy only to heat a specific place. Thanks to this, all consumed energy will be converted into heat, which contributes to the rational use of energy. This feature is successfully used by enterprises with large premises when it is necessary to create comfortable working areas. Spot heat is directed only to a specific location without heating the entire room, which is economically justified.
Another advantage of infrared models over convector ones is the localization of heat in the required place. The radiant energy of infrared devices acts directly on the required area, while when using convectors, there is a possibility of accumulation of warm air masses under the ceiling. The space in which the person is located remains a little warmed up.
The principle of operation of an infrared heater
Comparing these two types of heaters, I would like to note the low weight and compact dimensions of ceiling-wall household electric infrared heaters, their simple and affordable installation for everyone. Thanks to their modern design in various colors, the devices harmoniously fit into any interior, without taking up extra space and remaining almost invisible.
Infrared heater heating area
To find out which infrared heaters to choose for a production workshop or home use, you need to take into account the power of the device, the method of installation (wall or ceiling), the height of the room and the heating area of one device. The higher the power rating of the heater, the more area it can supply with heat. This parameter is indicated in the accompanying documentation for the device.
Another important parameter in calculating the heated area is the installation height of the infrared heater. More powerful heaters are installed higher, since overheating will be observed with a low installation. If the area of the room is large and the ceilings are low, it is better to purchase several low-power models. The table below shows what area infrared heaters heat according to the installation method and height.
| Device mounting height, m | Wall heater | Ceiling heater |
| Area heated by the device, m2 | ||
| 2,5 | 8 | 17 |
| 3 | 20 | 24 |
| 3,5 | 40 | 32 |
Helpful advice! To determine the power of the device for heating, you can use a simplified calculation recommended by specialists. It consists in the fact that 1 kW of heater power is enough to heat a room with an area of 10 m².
In the technical documentation for ceiling infrared heat sources, manufacturers indicate the minimum height at which a device of a given power can be located. So, heaters with a power of 1.2 kW can be installed at a height of at least 2.4 m, devices with a power of 2.4 kW can be mounted at least 3 m, for more powerful devices of 5.7 kW, the suspension height is from 6.5 m.
The best infrared ceiling mounted heaters, given their demand in the heating market, are considered to be the Russian-made Pion and Almak models.
Characteristics of infrared heaters Almak
The line of infrared heaters Almak includes models with a capacity of 5, 8, 10, 13, 15 kW, designed for heating respectively 5, 8, 11, 13, 16 m² of area. It should be noted that Almak heaters have an interesting modern design, their thickness is only 3 cm. The devices are produced in several colors: white, beige, gold, silver, wenge.
Infrared heating panels Almak are distinguished by their power
Almak heaters can be used to heat office and industrial premises, they fit perfectly into any interior of an apartment or house. Thanks to the convenient fittings that can be moved along the body, the instrument can be quickly and accurately set up without additional assistance. In the product catalogs, you can choose a device with a suitable power depending on the area of the room.
Almak heaters can be equipped with thermostat, which will maintain the set temperature in the room. The most powerful heater IK-16 can be used as the main heating in winter, if the area of the room does not exceed 16 m². In rooms up to 32 m², such a device can serve as an additional source of heat.
Helpful advice! When purchasing Almak heaters, keep in mind that the thermostat and the electrical connection cable are not included in the factory set.
The table shows the estimated power for objects with different operating modes when using the Almak IK-16 model.
| Room type | Estimated power per 1 m2 of area, W |
| Private well insulated house | 70 |
| Insulated country house | 100 |
| Outbuilding without insulation | 120 |
| Loggia, balcony without insulation | 120 |
| Greenhouse with polycarbonate walls (8 mm) without insulation | 130-150 |
| Barn, winter chicken coop with weak insulation, where a sufficiently positive temperature is not higher than 10-12 degrees | 100 |
Infrared heaters: pros and cons, device prices
Before buying, every consumer wants to know which infrared heater is better? To choose the right model, one should not only focus on its design, but also analyze the functionality of infrared heaters: pros and cons, prices for devices, main characteristics, customer reviews. This will guarantee the correct operation of devices purchased for any task.
Pros and cons of infrared heaters. Product Reviews
The advantages of infrared heat sources include high efficiency and practicality of devices, quiet operation, fire safety, and durability. The main advantage of IR heaters when used in industrial premises is the elimination of the danger of defrosting the system, as with water heating, as well as the absence of the need for expensive boiler rooms and additional ventilation systems. Ceiling and wall mounting saves significant floor space.
Often used for heating large storage facilities heat guns... Analyzing which heat gun or infrared heater is better, you should give preference to the latter option. Due to the fact that there are no moving elements, filters and lubricants in the device, the infrared heater works silently, does not raise dust and does not fail.Judging by the reviews of those who used heat guns, you need to be prepared for the fact that after turning it off, the room instantly cools down, and long-term operation is associated with a large consumption of electricity.
The infrared heater works not only efficiently but also helps to save up to 40% of energy
You can find many positive reviews in favor of infrared heaters in comparison with oil heaters. Buyers note that during the operation of IR devices, the humidity in the room does not change, while the operation of oil devices gives off a peculiar smell and they heat only in the 40-50 cm zone.Which oil or infrared heater is best for you, decide based on the technical characteristics and user reviews.
The disadvantages of infrared sources include some discomfort when the heaters are located close, the complexity of repair in the event of a breakdown and the high cost of some ceramic models. When choosing which is the best infrared or ceramic heater, keep in mind that the latter can work in rooms with high humidity. An overview of the pros and cons of infrared heaters will help you choose the optimal model of the device.
IR heaters prices for home
Get acquainted with the models of devices, order and purchase sources infrared radiation is most convenient in online stores and on the websites of manufacturing companies. In the product catalogs, you can find the best models of infrared heaters. The heaters presented on the sites are accompanied by a description of technical parameters, recommendations for their use and an indication of prices for devices.
Some models of infrared heaters, in addition to functionality, have a stylish modern design
By contacting the managers of companies selling infrared heaters, you can get expert advice on the choice of the power of the device, the method of installation, as well as the possibility of using one or another model of infrared heater for a humid room or for heating an open area. Many manufacturers post informational or training videos describing the main characteristics of the devices and examples of their installation.
Helpful advice! When deciding to purchase an infrared heater, give preference to trusted manufacturers.
Industrial infrared heaters can also be bought here. Competent specialists will help you calculate the number and power of devices required for a particular room, taking into account its height and area. Approximate prices for popular models of household and industrial infrared heaters of different brands are shown in the table.
| Manufacturer, model | Description | price, rub. |
| Almak. IR-11 | The 1000 W ceiling appliance is presented in a sophisticated design with rounded edges, capable of heating a room up to 20 m². Suitable for heating an office, apartment, summer residence, as well as for industrial premises. | 3480 |
| Neoclima, NC-IRHLS-2.0 | An excellent model of a floor-standing infrared heater for the home with the ability to mount on the wall. Power 2000 W. Equipped with thermostat, overheating protection, telescopic stand. Heating area - 20 m². | 2450 |
| Polaris, PCSH 0408RC | The device has an elegant rotary housing, is equipped with electronic control (touch panel / remote control), protection against overturning and overheating, thermostat. Supports two heating modes. Power 800 watts. | 3350 |
| Timberk, TIR HP 1 1800 | The wall model from the leading manufacturer is equipped with a timer, overheating protection. | 4790 |
| Ballu, BIH-AP-0.8 | An economical device designed for heating up to 8 m², power 800 W. Laconic design, it is possible to connect a thermostat. | 2490 |
| Peony, ceramics 06 | The ceiling heater is lightweight, with a power of 600 W. Ideal for small rooms: bathrooms, hallways, dressing rooms. Equipped with illuminated switch. | 4090 |
| Noirot, Royat 2 1800 | The model with a power of 1800 W, has a waterproof case, effectively heats up to 18 m² of the area.Supports three heating modes. Can be used outdoors. | 7100 |
| Zilon IR-0.8. S | Small ceiling heater with 800 watts. Heating area up to 8 m². Overheating protection. Can be wall mounted. Suitable as additional heating in an apartment. | 1950 |
| Mister Heat, Thermic C-0.1 | The 100 W model is designed for local heating of 1 m² of area. Can be installed on the inner surface of the desktop. Equipped with thermostat and overheating protection. | 1350 |
The HVAC equipment market offers a large selection of modern infrared heaters. By choosing a model that suits your room and its mode of operation, you will provide warmth and comfort in the cold season.
