In order to effectively and at the same time conveniently hide engineering communications, you can use several methods. One of the best is a hatch for pressure tiles. It is very similar to traditional access windows, but if correctly selected, it can be installed in a room almost unnoticed. The article will consider what parameters you should pay attention to before buying a hatch for a tile in a bathroom, kitchen or basement.
Tile hatch allows you to neatly mask access to the revision shaft
Content
How is the hatch under the pressure tile
Installation of an inspection hatch is carried out in the event that there is a need to provide the ability to quickly access any engineering communications, for example, cables, pipes, meters, etc. The outer part of the hatch cover can be faced in any way suitable for the interior: painted, pasted over with wallpaper and even glued with ceramic tiles.
The pressure hatch opens by pressing with the palm on its surface
You can place the access doors on any suitable surface, including walls, floor and ceiling. Installation in plasterboard partitions, inside which communications are laid, is also allowed. Very often, such hatches are installed under the tiles in basements.
The mechanism for opening / closing hatches can be very different, from the simplest (a small lock and a key to it or a magnetic lock), to more complex ones - push, which will be considered.
As for the shapes and sizes of hatches, there is much more choice here and is not limited by almost anything. There is a concept of standard sizes, which range from 200x200 to 1200x1200 mm. Manufacturers produce a huge number of a wide variety of models, which are not only square, but also round, trapezoidal, etc.
Components of the concealed hatch for tiles:
- a window frame having a certain shape;
- a door made of metal or plastic;
- opening system;
- hatch cover fixing system or conventional lock.
Diagram of the device of a pressure hatch for a tile
Tile-operated inspection hatch: product features
The concealed hatch for tiles with a push system is one of the types of access windows, the opening system of which has been improved. This allows them to be installed invisibly and not to spoil the appearance of the room.In addition, this allows you to solve the problem of installing a hatch in the toilet under the tiles, since usually there is very little space there, and access to communications is always necessary.
In order for the hatch to be able to withstand the load that finishing materials, for example, ceramic tiles or mosaics, will constantly put on it, reliable hinges are provided in the system.
The installation of a hidden hatch under the tiles has its own characteristics and installation is carried out differently as if it were a normal inspection window. The thing is that in an effort to make the hatch cover invisible, it is installed slightly deeper than the wall covering, in order to then glue it over with tiles, achieving the effect of complete invisibility.
Various options for opening sanitary push hatches
Useful advice! In order to avoid the need to waste time on measurements and cutting of tiles, it is recommended to initially select the dimensions of the hatch and finishing material that match each other.
It should be noted that an ordinary metal or plastic hatch under the tiles will not work. To securely fix the material on the surface, it is covered with a special plasterboard plate. It serves as an excellent base for fastening any material and at the same time is able to withstand significant loads.
Concealed tiled hatches are ideal for rooms in which it is necessary to install access windows, but this must be done in a conspicuous place. By hiding them behind an appropriate finish, they can be made completely invisible, harmoniously fitting in the interior of the kitchen, bathroom, toilet, etc.
As for the opening mechanism, in this case it happens as follows: a slight push from the outside provokes the actuation of mechanical latches, which contribute to the sliding of the hatch in the front direction. After that, the lid is pushed to the side, giving owners free access to all communications.
Hinges and hatch mechanisms are capable of withstanding 6-23 kg of door weight with facing material
It is also worth buying a flush-mounted hatch for a tile because this effective system allows you to open the hatch without the risk of damaging the tile. At the same time, the aesthetic and functional aspects of solving the problem are preserved.
How to choose and buy an inspection hatch for a tile: the main criteria
After reviewing the assortment on the market, each buyer will be able to get an idea of the cost, as well as the main parameters of the products in question. The easiest way to do this is by visiting a large hardware store, where several options from the most popular manufacturers are offered at once.
Upon examination, it soon becomes clear that the main selection criterion is the buyer's budget, since the variety of offers is extremely large. You can buy a plumbing hatch for a tile at different prices, which are in very wide ranges, depending on how exactly they are arranged and what material was used.
Pivoting hinges allow the hatch door to open up to 360 degrees
Inexpensive hatches are usually made of thin sheet material, which makes them impossible to disguise under tiles. Their structure is very simple, and the cost is low, however, such hatches are best installed in inconspicuous places. If the aesthetic side is not important, then you can purchase the cheapest bathroom hatch for tiles.
The middle price category includes hatches designed for hidden installation, but at the same time they are distinguished by a simple opening system. In this case, the hatch door is held by ordinary magnets, but it is possible to mask the cover with tiles. The opening system in this case is a built-in handles or special suction cups.
The highest cost is characterized by pressure hatches, which are the most technologically advanced version of revision windows. Nevertheless, almost all users who have made a choice in favor of such a solution claim that such expenses are more than justified. According to them, the simplicity and usability of this type of product exceed all expectations.
Important! Regardless of which type of hatch the owner prefers, its presence will greatly simplify the repair work, as well as regular checks provided for by the rules for the operation of household communications.
The manhole cover can be tiled with ceramic tiles, mosaics or other materials
Hidden hatches for tiles: sizes and prices
Wanting to buy a hidden hatch for tiles, each owner tries to choose the most suitable option, focusing on the characteristics and cost of the model. Let's consider how to determine the size of the hidden hatch under the tiles and what determines the price of this product.
Before you buy a pressure hatch for tiles, you must perform the following work:
- first of all, you need to decide where exactly the hatch will be located. Since its main task is to provide free access to communications, it must be located appropriately;
- then you need to measure the width and height of the tile that is used for wall decoration;
- based on the size of the tiles, the required number is calculated to close the hole;
- the width and height of the bathroom hatch under the tiles can be calculated by multiplying the required number of tiles by their size. These simple math will help you determine the correct size for the hatch.
Steel hatch is able to withstand higher weight loads than aluminum
The range of prices for pressure hatches is extremely large and starts from several hundred rubles. The most advanced and functional models can cost up to 16,000 rubles when it comes to custom-made production. Usually, if it is necessary to make a hatch of a special size or shape, the measurer is first called. After transferring the data, the company proceeds to manufacture, which on average can take from 3 to 10 days.
Useful advice! One of the arguments in favor of making an individual order for the manufacture of a pressure hatch is to obtain a 12-month warranty from the manufacturer.
As practice shows, hatches for tiles can serve for quite a long time, if you follow some of the recommendations of specialists regarding the selection and operation:
- if the hatch was installed in the opening, then it is strictly forbidden to exert significant pressure on the surface of its cover. This can lead to deformation, which in the future will not allow the hatch to fully close;
Some hatch models are equipped with gas shock absorbers for automatic opening
- if a one-leaf hatch model is installed, its width should not exceed 70 cm. If this size is not enough to close the opening, it is better to use two leaves;
- it is impossible, by your own decision, to mount a pressure sanitary hatch under the tiles on the floor. Not being designed for this, it will fail very quickly. For this, there are special floor hatches for tiles with shock absorbers;
- during transportation and storage, the hatch must be in an upright position to avoid deformation.
Dimensions and prices of the invisible hatch under the tiles:
| Manufacturer | Manhole size, cm | Material | Mounting type | Withstands weight, kg | price, rub. |
| Revizor | 20x20x4 | aluminum | into the wall | n / a | 1480 |
| 30x50x4 | 1860 | ||||
| 30x30x3.5 | steel | 8 | 2750 | ||
| Luker | 40x40x4 | 5 | 3036 | ||
| 40x90x5 | 12,5 | 3861 | |||
| Practice | 20x40x4.1 | aluminum | 9 | 3890 | |
| Hummer | 30x50x6 | 23 | 4800 | ||
| 60x120x6 | 72 | 7500 |
Hammer pressure hatches: characteristics of the best models
Hammer products are among the most popular today and are in demand due to a huge selection of models.Among all the variety, there are two models that work with a push mechanism. Let us consider each of them in more detail.
Slava pressure hatch model
It is a very easy-to-install and easy-to-use option, which is known for its reliability and long service life. The cost of "Glory" is quite moderate, which made it the leader in this category.
Pressure hatches are invisible in the bathroom interior, since they do not have handles or suction cups on the surface
An innovation was used in this hatch, which later became a distinctive feature and one can say the main advantage of this model - a well-thought-out system of hinges and joints. This solution allows you to easily open the hatch without resorting to the use of handles or suction cups.
In order to open the hatch, it is enough to lightly press on the surface of the cover from the side where the latches are located. Closing is done in the same way. In this case, the hinges in the mechanism are located in such a way that the alignment of the door and the opening occurs automatically.
Related article:
Floor drain under tiles: a modern solution for the bathroom
Product types, installation locations. Detailed instructions for installing the drain with a list of additional building materials and tools.
Among other technical features of the Slava model hatch, it is worth noting:
- the hatch can be installed on absolutely any type of surface;
- the hatch cover is able to protect communications from moisture due to the presence of a special insulating layer;
- the model has soundproofing properties, which is very convenient when it comes to the need for installation in a bathroom or toilet;
- the ability to abandon the use of handles and suction cups allows you to make the hatch completely invisible;
- absolutely any materials can be used to decorate the hatch, including artificial stone and ceramic tiles, which are of considerable weight. The hinges are capable of withstanding a significant load for a long time, while not warping or loosening. According to experts, the thickness of the finish can be up to 15 mm.
The surface of the hatch door can be tiled with ceramic tiles up to 1.5 cm thick
Useful advice! For this model of the hatch, it is allowed to mount a tile larger than the hatch cover itself, which avoids troublesome trimming.
It is also worth paying attention to the fact that the design of the Slava hatch can be improved with special gas shock absorbers, which make it possible to open the door automatically.
Zeus pressure hatch model
In this model, the developers tried to retain all the advantages of the previous version, while slightly changing the configuration and improving some aspects. First of all, "Zeus" is known for much greater strength and reliability, which was achieved thanks to the addition of additional stiffeners. Thanks to this, the structure is able to withstand enormous weight.
The permissible loads on the hatch of this model assume filling an opening up to 1600x1600 mm in size. At the same time, the thickness of ceramic tiles laid on top can reach 15 mm.
Press hatches are produced in various sizes, which makes it possible to choose a model based on the dimensions of the tiles
Do-it-yourself installation of an inspection hatch under the tiles
Installing a pressure hatch is not difficult, and a beginner may well cope with this task. The only thing worth paying close attention to is the accuracy of the placement of all elements. After all, even small deviations can provoke the appearance of distortions that will not allow the tiles to settle properly. As a result, the hatch will be visible on the surface.
First of all, you need to start installing the revision window frame, which is attached flush with the wall surface and fixed with self-tapping screws from the inside. Typically, all fasteners are included with the silicone sealant.
In the process of attaching the tile to the wall surface, it is very important that there is free space around the hole, the size of which corresponds to the size of the tile that will cover the hatch cover.
Important! In order for the tile to be reliably held on the surface of the hatch cover, at least 70% of the area of each tile must be glued. Moreover, from the side where the hinges are located, the facing material should not protrude more than 4-5 cm. This is necessary for the mechanism to function properly.
Installation diagram of a pressure hatch under a tile
As for the choice of the location of the inspection window, there is only one requirement - the distance between the hole and the corner of the room must be at least 80 mm. This standard is established in order to provide the retractable mechanism with sufficient space to work.
Another important point that you should pay attention to in the process of work is grouting after finishing work on laying the tiles. In no case should you rub the seams around the hatch, as this will immobilize the mechanism.
Installing a hidden hatch under a tile in a bathroom, toilet or kitchen is an opportunity to provide comfortable access to all communications and at the same time not to spoil the interior of the room. Having chosen the required size of the hatch for the tile, it can be made completely invisible to others, which is important for maintaining the aesthetics of the room. And the technical characteristics of these products, as you can see, not only are not inferior, but even surpass all other options.
